 |
 |
- the mix in the flower bag must be wet thoroughly.
- hold under a tap, watering can or hose.
- when filled the water will drip from the bottom cut corners.
- after watering, lay the bag flat at a comfortable height and
pat down forming a flat 'sausage' shape.
- space out your 'T' shaped cuts on one side of the flower bag
only.
- the 'T' shaped cuts should be facing upside down.
we suggest 8 cuts, 2 rows of 4 evenly spaced 'T' cuts on the bag.
some of our bags have less than 8 cuts depending on the expected
growth and covering of the plants.
- using a sharp knife make 3 cm cuts in each leg of the 'T'.
- using a dibber or similar implement, push into each cut to make
a planting hole.
- remove a seedling fro the punnet a push gently into the hole.
- pressing the bag gently around the plant will force the potting
mix around the seedling.
- repeat for all the holes.
careful, the plastic is stronger than you think but
will cut easily with a sharp blade. a good idea is to mark the cuts
with a 'texta' pen (permanent marker type pen), this will help prevent
overcutting.
back
© the flower and herb bag company
|
|
